Contact Miss Zhou: 136.1266.9271 QQ: 13612669271 thermal ink English as PLASTISOL, also known as the plastic melt ink, oily glue; is a non-solvent-based inks. Appearance and Composition: Appearance: paste ingredients: resin (solvent-free, water), pigments, and other additives, 100% solid content Features: thixotropic, denser when you place, stirring becomes thinner, summer relatively rare, Instead winter applications: 1, suitable for hand printing, machine printing can be printed Ko-color, graphic, three-dimensional rectangular, round, stone, bark effects and other special products. Under thermal ink not dry at room temperature, and heated to 1500C-1800C 1-3 minutes to bake the ink completely cured! After wet cleaning of plastics firmly attached to more than 5, more than four dry rub. 2, the absorption heat is a process, is determined by two factors temperature and time, high temperature short time, low temperature required a longer time, but the temperature is not lower than 1500C. In order to increase the efficiency of delivery is usually, the temperature is selected 1650C ~ 1800C. The simplest way to detect whether ink curing: Ink is flexible after curing, surface scratch can not afford to powder, scraping is not bad; otherwise explain plasticizing temperature is not enough, adjustment shall be based on the original superheat temperature increase plasticizing temperature and then the appropriate time.